Tekno MT410 Monster Truck KIT – Build Update 1

Tekno RC is known for their top quality (no upgrades needed) race kits. Now, entering into the Monster Truck market, Tekno RC is offering the Tekno MT410 Monster Truck KIT. In this video I show how the KIT build went, tools needed, owners manual, and the electronics I chose for the build.


Here’s the items mentioned in this episode:

Tekno 2.5mm Hex Wrench: amzn.to/2gwToKg
Tekno 2.0mm Hex Wrench: amzn.to/2gwTO3i
Tekno 1.5mm Hex Wrench: amzn.to/2gEt0ie
Tekno Shock Shaft Pliers: amzn.to/2f1ekbL
Tekno 17mm Wheel Wrench: www.teknorc.com/shop/tkr1116-17mm-wheel-wrench-shock-cap-tool/
AKA Double Drive nut driver: amzn.to/2fm1Z0D
EDS 4.0mm Arm Reamer: amzn.to/2fXoLu6
General Tools 6″ Calipers: amzn.to/2fm7n3S

Tekin RX8 Gen2 ESC: amzn.to/2gwTdi7
Tekin 4038 T8 2000kv Motor: amzn.to/2fm7CMk
Hitec D951 Servo: Not Yet Available
Futaba 4PV Padio System: amzn.to/2fmcwZx

For more information on the Tekno MT410 Monster Truck KIT from Tekno and pricing :


  1. Great Build! Looking forward to the follow up! I’ll be making some prototype Carbon Fiber pieces for this car

  2. As always well done video, this is my next kit as I don’t have any bashers just strictly race rigs. I had some questions about the 410 but your video answered all of them so thanks again. One thing I was curious about is I have an eb48.3 and did you find that there are many parts that can be shared by the 410 and the 48.3?

Leave a Reply